Welcome to
Manufacturer of the KEM-O-PRO ®
Line of Automotive, Marine and Industrial Care Products
Detailing Chemicals | Fuel Additives | Gear Oils | Synthetic Lubricants | Synthetic Oil Treatments | Waxes and Polishes
SCO-922
Clear Synthetic Metalworking Fluid
| TEST | ASTM** | TYPICAL PROPERTIES |
|---|---|---|
| Color | Light amber | |
| Appearance, concentrate | Transparent liquid | |
| Sp. gravity, @ 15.6C/60F | D1298 | 1.085-1.100 |
| Density, lbs/gal @ 25.0C | 9.03-9.15 | |
| Viscosity @ 25.0C, #4 Ford Cup | 15.4-19.2 | |
| TAN | D974 | 14.1-29.0 |
| Foam break, 20:1 dilution, seconds | 15-30 | |
| pH, concentrate | 8.6-10.0 | |
| pH, 20:1 dilution | 8.0-8.5 | |
| Pour Point C | D97 | -31.7 |
| Cloud Point C | D97 | -20.0 |
| Sulfur, % wt | D4294 | 0.002 (20 ppm) |
| Chlorine, % wt. | 0.010 (100 ppm) | |
| % Non Volatiles | 51.3-57.9 |
Refractometer Degrees Brix
| 10:1 dilution | 5.4 |
| 20:1 dilution | 2.7-3.3 |
| 30:1 dilution | 1.8 |
| 50:1 dilution | 1.2 |
| 100:1 dilution | 0.6 |
Spectrochemical Analysis by Atomic Emission
| Calcium, ppm | 34 |
| Phosphorous, ppm | 16 |
Rust and Corrosion Tests, 100:1 Dilutions, After 120 Hours @ 25C
| Fe Rust | none |
| Cu Corrosion | none |
| Al Corrosion | none |
Biodegradability and Waste Disposal, 100:1 Dilutions
| BOD, mg/L | 2.7 |
| COD, mg/L | 10,846 |
| TOC, mg/L | 2,940 |
Microbiological Inhibition
| 100:1 Dilution, 2 weeks @ 25C | Clear |
*For general information only. Not to be used as purchasing specifications.
**ASTM or modified ASTM methods.
ALL DATA, including suggestions and procedures discussed herein, are based on information we believe to be reliable and correct as of the date compiled. However, they should not be accepted as a guarantee or warranty to their accuracy, reliability or completeness. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. We do not accept liability for any loss or damage that may occur from the use of this information, nor do we offer any warranty against patent infringement.
Detailing Chemicals | Fuel Additives | Gear Oils | Synthetic Lubricants | Synthetic Oil Treatments | Waxes and Polishes
J. B. Chemical Co. Inc. 14803 S. Spring Street. Gardena, CA. 90248 USA |
To better serve our customers, we have moved into a larger facility. We apologize for any inconvenience and look forward to doing business with you. |
Telephone: 310-532-3021 Toll free in the USA: 800-522-2468 Fax: 310-532-2810 E-mail:kemopro@sbcglobal.net |
Copyright © 1995-2010, J. B. Chemical Co., Inc., All rights reserved